Sunbeam TORINO User Manual Download

Page: 36 / 60

Troubleshooting Guide continued

Problem

Possible Cause

Solution

Coffee pours too
quickly. Under
Extraction

• Coffee grind is too coarse.
• Too little coffee in the filter

basket.

• Coffee not tamped firmly

enough.

• Use a finer grind.
• Fill filter basket with more coffee,

and/or use a dual filter basket.

• Tamp more firmly.

Coffee is too weak • Using small filter basket for

double shot of espresso.

• The coffee is under extracted.

• Use the double filter basket for 2

cups of coffee, or one single 'double
strength' cup of coffee.

• See ‘under extraction’ section above.

Espresso does not
have any crema

• Coffee is old or dry.

• Coffee not tamped firmly

enough.

• Coffee grinds too coarse.
• Not enough coffee in filter

basket.

• Use fresh coffee beans. Once

opened, store in an airtight container
quickly. Store away from heat and
light. Do not store in the fridge.

• Tamp more firmly.

• Use a more fine grind.
• See ‘Using your Torino’ section.

Coffee runs down
the side of the
filter handle

• Group handle is not attached

correctly, or group handle is
not tightened sufficiently.

• Too much coffee in the filter

basket.

• Group head has loose coffee

grinds remaining.

• Group head rubber seal is

damaged or worn.

• See ‘Using your Torino’ section.

• Fill filter basket with less coffee.

• Wipe with a damp cloth.

• Contact the Sunbeam Customer

Service Team.

Summary of Contents for TORINO





























































Search results

Summary of Contents for TORINO

Reviews:

Related manuals for TORINO

Brands by name

Popular brands

Sunbeam TORINO, User Manual

Search results

Summary of Contents for TORINO

Reviews:

Related manuals for TORINO

Brands by name

Popular brands