Sunbeam TORINO, User Manual

Page: 33 / 60

31
Steam Thermoblock Descaling
Scale is a surface build-up of minerals that
naturally occur over time in all appliances
that are involved with the heating of water.
Therefore the espresso machine will require
occasional descaling. It is recommended
that the espresso machine is descaled every
4-6 months; this will vary depending on the
frequency of use and the water hardness in
your area.
You can use the cleaning cycle when you
wish. The Torino will also remind you when
a cleaning cycle is required by displaying
CLEAN on the LCD display.
Note: During the cleaning cycle all other
espresso machine operations will be locked
until the cleaning cycle is completed. Should
the cleaning cycle be accidentally started
it can be cancelled by switching the power
‘OFF’ at the power outlet, or by pressing the
POWER button on the machine.
Before starting the steam cleaning cycle
1. Remove the water reservoir and rinse
clean. Completely fill with fresh water
and replace.
2. Place a large container or bowl under the
steam wand, so water from the steam
wand will go into the container.
Important: The steam dial must be closed to
start descaling.
The steam cleaning cycle
If CLEAN appears on the LCD display, go to
Step 3 below.
1. Insert the power cord into a 230-240V
AC power outlet and switch the power
‘ON’.
2. Press the POWER button on the espresso
machine to turn the machine on. Wait
until READY appears on the LCD display.
3. Press CLEAN button twice (2) to choose
Steam Clean (St Clean) function on the
LCD display.