13
Operating Instructions
Sav
er
Mid
Mode
Auto
High
Lo
w
Tim
er
2
1
2
3
8
9
8
7
3
5
6
4
1
BUTTON
Mode BUTTON
Timer BUTTON
The appliance will be started when it is energized
or will be stopped when it is in operation, if you
press this button.
Used to select the operation mode.
Used to set or cancel timer operation.
Remote control
Indication symbols of LCD on remote control:
4
High BUTTON
Used to select the
mode.
high fan speed
5
Mid BUTTON
Used to select the Mid
mode.
fan speed
6
Low BUTTON
Used to select the Low
mode.
fan speed
7
Auto BUTTON
Used to select the Auto
mode.
fan speed
9
Saver BUTTON
Used to select the
mode.
Energy-saving
The Above symbols are shown when the relevant mode is in use.
High fan speed
Medium fan speed
Low fan speed
Auto fan speed
Cooling
Fan only
Energy-saving
Signal transmit
When Changing modes during operation, sometimes the unit does not always respond at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
BUTTONS
Used to set room temperature in Cooling
mode or used to set time in Timer mode.
Temperature setting range is from 19
(66
)
to 31
(88
).
Display set temp
Display set timer
Each time the
Mode
button is pressed, the
operation modeis changed in sequence:
COOLING
FAN ONLY
COOLING
Note: Press the TIMER button again to
confirm setting after adjusting the time.
