Sunbeam Safe & Sound, Instruction Booklet

Page: 18 / 24

12 hour setting
Ideal for colder nights or those who like
warmth all through the night, the 12
hour setting automatically switches your
electric blanket off after 12 hours. Move
the slide switch to the 12 hour position.
The temperature dial will then illuminate
enabling you to turn the dial to your
desired heat setting. The timer indicator
light (positioned next to the side switch)
will go out, indicating that the blanket is
on and heating. Sunbeam recommends
that you use only settings 1, 2 or 3 for all
night use.
Your electric blanket will automatically
switch off after 12 hours. At the end of the
timer period, the timer indicator light will
illuminate and the light in the temperature
dial will go out, indicating that the timer
period has elapsed and the blanket is no
longer heating.
To restart the timer, move the slide switch
to the OFF position and then return it to
the desired timer position.
Using your digital timer control
Move the slide switch to the on position
to turn the control on. Select the desired
temperature using the up/down temperature
buttons (

). The selected setting wil be
displayed on the LCD screen.
Press the timer button to cycle through the
timer settings: 1 (1H), 3 (3H) or 12 hours
(12H). The selected timer setting is also
displayed on the LCD screen. At the end of
the timer period, the LCD display will flash
showing heat setting 0 and the elapsed timer
setting. To reset the timer, move the slide
switch to the off position and back to on.
Pressing the timer button before the timer
has elapsed will change it to the next timer
setting and restart the timer for the new
period.
You can adjust the temperature setting at any
time during the timer period.
Using your electric blanket (continued)
Figure 8.
16