Before first use
Before using your electric blanket for the first
time, Sunbeam recommends that you switch
the blanket to maximum heat (setting 9) for
two to three hours to evaporate any moisture
in the mattress. Repeat this process every
few months to maintain a dry, healthy bed.
Your electric blanket control has nine heat
settings, which are recommended for use as
follows:
1-3 Low, gentle heat for all night use
4-6 Medium heat
7-9 High heat, for preheating only
Use the high heat settings to preheat your
bed only. Do not sleep with your blanket on
these settings for more than 30 minutes.
Using your 9 heat control
Your 9 heat control features an on/off slide
switch plus an easy to use dial to select the
temperature setting (see Figure 6). The heat
setting dial is illuminated to enable easy
adjustment in the dark.
Using your 9 heat control with timer
Your timer control features a slide switch to
select the desired operating mode, plus an
easy to use dial to select the temperature
setting (see Figure 7). The heat setting dial is
illuminated for easy adjustment in the dark.
75 minute setting
Use the 75 minute setting to preheat
your bed before hopping in. Move the
slide switch to the 75min position. The
temperature dial will then illuminate
enabling you to turn the dial to your
desired heat setting. The timer indicator
light (positioned next to the slide switch)
will go out, indicating that the blanket
is on and heating.
Your electric blanket will automatically
switch off after 75 minutes. The timer
indicator light will illuminate and the
light in the temperature dial will go out,
indicating that the timer period has
elapsed and the blanket is no longer
heating.
To restart the timer, move the slide switch
to the OFF position and then return it to
the desired timer position.
Using your electric blanket
Figure 7.
1
Figure 6.
1
15
Summary of Contents for Safe & Sound
Page 22: ...Notes...