F i b e r O p t i c S o l u t i o n s P r o v i d e r
6/8
www.suntelecom.cn • +86-21-60138638 • [email protected]
4
Notes
4.1
This cabinet is suitable for the connection, distribution and dispatch of
outdoor cable. It is supposed to be fixed on the firm fixing base for easy
installation and dispatch.
4.2
There is an air cleft between the cabinet border and the baseboard to
keep the inside of the cabinet dry. Do not block it during the installation.
4.3
Keep the excess part of the fiber cable bending naturally and the
bending radius should be 20 times bigger than the diameter of the fiber
cable.
4.4
The opening direction (left or right) of the cabinet is up to the user. As
long as the positioning pin is removed, you can change the opening just
by rotating the door 180 degree.
4.5
The lock hole of the box door is equipped with a stainless steel
protective cover. Close the cover to prevent the hole was blocked after
installation.
4.6
Be careful when operating the optical fiber to avoid piercing the skin and
eyes.
4.7
You are advised not to look directly at the fiber or the end-face of the
fiber connector during the light energy was transmitted optically unless
the safe energy output is guaranteed.
