NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
© 2014, Pinnacle Products International, Inc.
Halogen Infrared Heater User’s Manual
Assembly
Mounting:
Hanging Wall Mount
1.
Secure swivel arms on the wall mounting
bracket using set screws and built in
hex-bolts.
2.
Attach the mounting bracket to a wall stud as
shown below using the four (4) included
wall mounting screws. (Figure 3)
Using The Swivel Arms
1.
Loosen the swivel arms with the set screw
and built in hex-bolts.
2.
Position swivel arms at the desired angle.
3. Secure swivel arms by tightening set screws
and hex-bolts.
Attaching Heater to Wall Mount
1.
The tilting heater support bracket is attached
to the heater body with two knob screws.
2.
Attach heater support bracket to wall
mounting bracket using four (4) 10mm
screws. (Figure 4)
NOTE: The mounting bracket is designed to
support the weight of the heater only. DO NOT
hang any object other than the heater from
the wall mounting bracket, swivel arms or
support bracket.
Using The Tilting Support Bracket
1.
Loosen the tilting support bracket using the
knob screws.
2.
Position the tilting support bracket at the
desired angle.
3. Secure the tilting head bracket by tightening
the knob screws.
5
The installer MUST be certain
the wall mounting bracket
is attached to a minimum of a 2
''
X4
''
wall
STUD that is able to support 25 pounds
continuously.
CAUTION
Tip: Use the back plate of the wall
mounting bracket as a template to
pre-drill the holes for the mounting screws.
Wall Mounting Bracket
Back Plate
2''X4''
STUD
Wall Mounting
Screws
Figure 3
Figure 4
Wall Mounting
Bracket
Heater Support Bracket
(Attached to Heater)
DO NOT MOUNT HEATER ON
THE CEIlING. MOUNT ONlY
AS DESCRIbED AbOVE ON A 2
''
X4
''
WALL STUD.
WARNING
