NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
© 2014, Pinnacle Products International, Inc.
Halogen Infrared Heater User’s Manual
Maintenance
Cleaning:
1.
Clean the outer shell of the heater with a soft
damp cloth.
2.
Dry the outer shell of the heater with a soft
cloth and allow to dry completely before
operating heater.
3. Do Not use abrasives, rough brushes or
scrubbing pads to clean the heater.
4.
Do Not submerge the heater in water or other
liquid to clean.
Storage:
Short Term Storage
1.
Disconnect heater from power supply.
NOTE: For heaters used outdoors, do not
store outdoors while not in use.
Long Term Storage
1.
Disconnect heater from power supply.
2.
Remove heater from wall mount.
3. Complete all cleaning procedures.
4.
Wrap cord and heater in plastic shipping
bags.
5.
Store in a cool, dry place.
ALWAYS DISCONNECT HEATER FROM POWER SUPPLY BEFORE SERVICING.
WARNING
When servicing or replacement of a component in the heater requires the
removal or disconnection of a safety device, that safety device must be
re-installed properly before operating the heater.
WARNING
7
FIRE OR EXPlOSION MAY
OCCUR! Do Not use alcohol,
gasoline, furniture / metal polish or any other
flammable substances to clean this heater.
WARNING
Tip: Use compressed air to clean any dirt
or debris from the front guard or around
the bulb.
RISK OF BURNS! THIS HEATER IS HOT WHILE OPERATING. ALLOW TO COOL
COMPlETElY bEFORE PERFORMING MAINTENANCE OR STORAGE.
WARNING
Tip: Keep original shipping materials to
store heater during off-season.
Tip: Leave wall mounting bracket hanging
during off-season for easy installation
when heater is taken out of storage.
