12
Sun Dual Gigabit Ethernet and Dual SCSI/P Adapter Installation and User’s Guide • January 2004
6. Type the following to verify the second SCSI device:
Note –
Your
.properties
list may differ slightly from the previous example. The
properties list will be affected by the system the SCSI is connected to.
7. When you finish looking at the
.properties
values, be sure to enter the
following command:
ok cd /pci@1e,600000/pci@4/scsi@2
ok .properties
assigned-addresses 81021010 00000000 00001000 00000000 00000100
83021014 00000000 03700000 00000000 00002000
8302101c 00000000 03702000 00000000 00002000
82021030 00000000 03710000 00000000 00010000
device_type scsi-2
clock-frequency 02625a00
reg 00021000 00000000 00000000 00000000 00000000
01021010 00000000 00000000 00000000 00000100
03021014 00000000 00000000 00000000 00002000
0302101c 00000000 00000000 00000000 00002000
02021030 00000000 00000000 00000000 00010000
name scsi
compatible pci1000,b.7
pci1000,b
pciclass,010000
pciclass,0100
fcode-rom-offset 00000000
devsel-speed 00000001
class-code 00010000
interrupts 00000001
latency-timer 00000040
cache-line-size 00000010
max-latency 00000040
min-grant 00000011
revision-id 00000007
device-id 0000000b
vendor-id 00001000
ok device-end