18
Sun Dual Gigabit Ethernet and Dual SCSI/P Adapter Installation and User’s Guide • January 2004
1. List the network devices on your system.
2. Set the Sun Dual Gigabit Ethernet and Dual SCSI/P adapter device to be your
default boot device by typing:
Note that the command shown in this example sets your boot device to be port 0 on
the network portion of the card
Rebooting the System
After verifying the adapter installation, use the
boot -r
command to perform a
reconfiguration boot on your system.
ok show-nets
a) /pci@1f,2000/pci@1/network@1
b) /pci@1f,2000/pci@1/network@0
c) /pci@1f,4000/network@1,1
q) NO SELECTION
Enter Selection, q to quit:q
ok setenv boot-device /pci@9,600000/pci@1/pci@0/network@0
ok boot -r
