Chapter 2
Installing the Adapter
11
4. View the
.properties
file for a list of device properties.
The .
properties
command displays the specific information about the installed
adapter.
Note –
Your
.properties
list may differ slightly from the previous examples. The
properties list will be affected by the system the SCSI is connected to.
5. When you finish looking at the
.properties
values, be sure to enter the
following command:
ok cd /pci@1e,600000/pci@4/scsi@2,1
ok .properties
assigned-addresses 81021110 00000000 00001100 00000000 00000100
83021114 00000000 03704000 00000000 00002000
8302111c 00000000 03706000 00000000 00002000
82021130 00000000 03720000 00000000 00010000
device_type scsi-2
clock-frequency 02625a00
reg 00021100 00000000 00000000 00000000 00000000
01021110 00000000 00000000 00000000 00000100
03021114 00000000 00000000 00000000 00002000
0302111c 00000000 00000000 00000000 00002000
02021130 00000000 00000000 00000000 00010000
name scsi
compatible pci1000,b.7
pci1000,b
pciclass,010000
pciclass,0100
fcode-rom-offset 00000000
devsel-speed 00000001
class-code 00010000
interrupts 00000002
latency-timer 00000040
cache-line-size 00000010
max-latency 00000040
min-grant 00000011
revision-id 00000007
device-id 0000000b
vendor-id 00001000
ok device-end
