Sun Microsystems TurboGX, Installation Manual

Page: 14 / 82

xiv TurboGX/TurboGXplus Installation Guide — November 1993
When You Need Help with UNIX
This manual does not include specific software commands or procedures.
Instead, software tasks are named and you can refer to the operating system
documentation that was shipped with your system when you need help with
commands or procedures such as:
•
Shutting down the system
•
Configuring devices
•
Other software procedures
Depending on the operating system you are using, you can find descriptions of
commands and procedures for installing peripherals in the following
documents:
•
Solaris 1.x (SunOS 4.x) Handbook for SMCC Peripherals
•
Solaris 2.x Handbook for SMCC Peripherals
•
On-line AnswerBook documentation that comes with Solaris
•
Other software documentation you received with your system
Task Map for Getting Your System Running
The diagram below outlines the tasks you can perform to successfully install a
new peripheral. Each numbered item in the diagram represents a procedure
and the arrows point to manuals in which these procedures are detailed.
Platform specific
Hardware
1. Unpack Peripheral Hardware
2.Verify Hardware Components
3. Shut Down the System
4. Install Peripheral Hardware
6. Configure the Device
Platform Specific Handbooks
5. Start Up the System
Installation Guide
used
with this guide