Sun Microsystems SunSwift SPARCserver 1000, Service Manual

Page: 59 / 218

Diagnostics and Commands for Troubleshooting 2-13
2
5. Type
0
to enter the System Parameters submenu.
6. Type
2
to display the system status.
(The display below is an example. Your display will vary with options
actually installed.)
*** Toggle Stop POST Flag = 1 ***
1A>
DEMON
1A>Select one of the following functions
1A> ‘0’ System Parameters
1A> ‘1’ Read/Write device
1A> ‘2’ Software Reset
1A> ‘3’ NVRAM Management
1A> ‘4’ Error Reporting
1A> ‘5’ Analyze Error Logs
1A> ‘6’ Power Off at Main Breaker
1A> ‘7’ NVRAM SIMM tests
1A> ‘r’ Return to selftest
1A>
Command ==>
Command ==> 0
1A>
System Parameters
1A>Select one of the following functions
1A> ‘0’ Set POST Level
1A> ‘1’ Dump Device Table
1A> ‘2’ Display System
1A> ‘3’ Dump Board Registers
1A> ‘4’ Dump Component IDs
1A> ‘5’ Clear Error Logs
1A> ‘6’ Display Simms
1A> ‘7’ Scrub Main Memory
1A> ‘r’ Return