Sun Microsystems Sun Netra CP3250, User Manual

Page: 130 / 134

C-4 Sun Netra CP3250 Blade Server User’s Guide • April 2009
fans
IPMB address (optional)
FRU device ID (optional) Shows information about fans.
fru
IPMB address (optional)
FRU device ID (optional)
FRU type (optional) Shows information about one or a group
of FRUs in the shelf; FRUs are selected
by type or by the parent IPM controller.
frudata
IPMB address (optional)
FRU device ID (optional)
block/byte offset (optional)
data (optional) Provides raw access to the FRU.
Information on the specified FRU.
frudatar
IPMB address
FRU device ID
File name Reads the FRU data area of the specified
FRU and stores the data in the specified
file.
frudataw
IPMB address
FRU device ID
File name Writes the FRU data in the specified file
into the FRU data area of the specified
FRU.
fruinfo -v
IPMB address
FRU device ID Provides user-friendly FRU Information
output.
getthreshold
|
threshold
IPMB address (optional)
sensor name (optional)
sensor number (optional) Shows threshold information about a
specific sensor.
help
Shows the list of supported commands.
ipmc
IPMB address (optional) Shows information about one or all IPM
controllers in the shelf.
minfanlevel
fan level (optional) Shows or sets the minimum fan level.
ps -ef |grep hp
Checks the
openhpi
status.
sensor
IPMB address (optional)
sensor name (optional)
sensor number (optional) Shows information about one or a group
of sensors; sensors are selected by IPM
controller address, number or name.
sensordata
IPMB address (optional)
sensor name (optional)
sensor number (optional) Shows value information for a specific
sensor.
sensorread
IPMB address
sensor number Shows raw value information for a
specific sensor (ignoring any Sensor Data
Record describing the sensor).
TABLE C-1
Shelf Manager CLI Command Summary (Continued)
Command Parameters Description