Chapter 2
Installing and Configuring the Server Module
21
1. To log on to the ILOM, type:
$
ssh root@
ipaddress
where
ipaddress
is the ILOM’s IP address.
2. Type the password when prompted. The default is
changeme
:
Password:
changeme
Note –
After you log in to ILOM using the default user name and password, you
should change the the ILOM root account password (
changeme
). See the
Sun
Integrated Lights Out Manager 2.0 User’s Guide
or the ILOM 3.0 documentation
collection for details.
3. To log out, type:
->
exit
Configuring the Service Processor’s Network
Settings (Optional)
The CMM ILOM allows you to change the server module network information,
including the IP address, and DHCP settings.
▼
To Configure the Service Processor’s Network
Configuration:
1. Log in to the CMM ILOM
.
See the ILOM documentation for your chassis for details.
2. Navigate to /CH/BL
n
/SP/network.
Where
n
is 0 through 9 for server modules 0 through 9 respectively.
Note –
You can also change these settings using the ILOM 2.0 or ILOM 3.0.
Navigate to
/SP/network
instead of
/CH/BL
n
/SP/network
. Once there, the
commands are identical.
3. Type the following commands:
