18
Sun Blade X6250 Server Module Installation Guide • May 2009
▼
To Display the Service Processor’s IP Address
Note –
This procedure can be used for ELOM as well as ILOM 2.0 and ILOM 3.0.
1. Log in to the CMM ILOM CLI.
2. Type the command:
show /CH/BL
n
/SP/network
where
n
is the server module number or chassis slot ID.
The CMM ILOM displays information about the server module, including its IP
address and MAC address. For example:
Connecting to the ILOM
This section describes how to connect to the ILOM’s CLI and web interface.
▼
To Connect to the ILOM Web Interface
Note –
To improve response times, disable the browser proxy server (if used).
->
show /CH/BL0/SP/network
/CH/BL0/SP/network
Targets:
Properties:
type = Network Configuration
commitpending = (Cannot show property)
ipaddress =
IPaddress
ipdiscovery = dhcp
ipgateway =
IPgateway
ipnetmask = 255.255.252.0
macaddress =
Macaddress
pendingipaddress =
IPaddress
pendingipdiscovery = dhcp
pendingipgateway =
IPgateway
pendingipnetmask = 255.255.252.0
Commands:
cd
set
show
->
