14
Sun Blade X6250 Server Module Installation Guide • May 2009
Caution –
Do not operate the system with empty slots. Always insert a filler panel
into an empty slot to reduce the possibility of module shutdown.
3. Position the server module vertically so that the ejectors are on the right.
The following illustrations show the server module being inserted into the Sun
Blade 6000 modular system; your chassis might differ. See box 1 in
FIGURE 2-1
.
Caution –
The server module is heavy. Use two hands to insert it into, or remove it
from, the chassis. If you remove a server module from the chassis, be prepared to
support the weight when it clears the chassis.
FIGURE 2-1
Inserting the Server Module into the Chassis
4. Push the server module into the slot until the server module stops.
See box 2 in
FIGURE 2-1
.
