20
Sun Blade X6250 Server Module Installation Guide • May 2009
Note –
After you log in to ILOM using the default user name and password, you
should change the the ILOM root account password (
changeme
). See the
corresponding ILOM documentation collection for details.
3. Click Log In.
The web interface Versions page appears.
FIGURE 2-3
Versions Page for ILOM 3.0
▼
To Connect to the ILOM CLI
You can access the ILOM CLI remotely through a Secure Shell (SSH) or serial
connection. Secure Shell connections are enabled by default.
If you do not know the ILOM’s IP address, find it as described in
“Displaying the
Service Processor’s IP Address” on page 17
.
The following procedure shows an example using an SSH client on a UNIX system.
Use an appropriate SSH client for your operating system. The default user name is
root
and default password is
changeme
.
Follow these steps to log in to ILOM using the default enabled SSH connection:
