Sun Microsystems SUN BLADE 150, Service Manual

Page: 56 / 218

3-20 Sun Blade 150 Service Manual • June 2002
DMMU TSB Reg Test
DMMU Tag Access Reg Test
IMMU TSB Reg Test
IMMU Tag Access Reg Test
All Basic Cache Tests
Dcache RAM Test
Icache RAM Test
MCU Control & Status Regs Init
Initializing Memory and MC registers
DIMM 0: 256 MBytes = 0x10000000 bytes
DIMM 1: 256 MBytes = 0x10000000 bytes
DIMM 2: 256 MBytes = 0x10000000 bytes
DIMM 3: 256 MBytes = 0x10000000 bytes
Found 4 DIMMs in bank 0
Bank 0: 1024 MBytes
DIMM0 is a 32M x 8 device
DIMM1 is a 32M x 8 device
DIMM2 is a 32M x 8 device
DIMM3 is a 32M x 8 device
MC0 = 0x00000000.96a0cf06
MC1 = 0x00000000.80008000
MC2 = 0x00000000.cff0eeee
MC3 = 0x00000000.00600b5f
CPU MODULE upa_config is 0x0000003a.00000000
Ecache Tests
Displacement Flush Ecache
Ecache RAM Addr Test
Ecache Tag Addr Test
Memory Init
Malloc Post Memory
Memory Addr Check w/o Ecache
Load Post In Memory
Run POST from MEM
.........
Map PROM/STACK/NVRAM in DMMU
Update Master Stack/Frame Pointers
All FPU Basic Tests
FPU Regs Test
FPU Move Regs Test
All Basic IOMMU Tests
CPU’s IOMMU Regs Test
CPU’s IOMMU RAM Addr Test
CPU’s IOMMU CAM Address Test
CODE EXAMPLE 3-2 diag-level
Variable Set to
min
(Continued)