Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z, Installation Manual

Page: 42 / 68

32 Sun StorageTek 8 Gb FC PCI-Express HBA Installation Guide • September 2009
■
“To Install the Fibre Channel Driver” on page 32
■
“Diagnostic Support for the Windows OS” on page 33
▼
To Download the Fibre Channel Driver
1. Go to the QLogic support site for Sun Microsystems at:
http://support.qlogic.com/support/defaultsun_page.asp
2. Locate the table containing the HBA model: single-port SG-XPCIE1FC-QF8-Z or
dual-port SG-XPCIE2FC-QF8-Z.
3. At the bottom of the table, in the Software for row, click Windows.
4. In the table for your Windows operating system, find the appropriate driver.
5. In the Download column of that row, click Download.
6. Save the file to a directory on the hard disk of the computer.
7. Unzip (extract) the driver files to a location on the hard disk of the computer.
▼
To Install the Fibre Channel Driver
After installing the HBA and restarting the computer, the Windows OS detects the
newly installed device and displays the Found New Hardware with Fibre Channel
Controller message. The Found New Hardware wizard launches.
Note –
This procedure requires a system configured with the latest Service Pack and
Windows Update.
1. On the first screen of the Found New Hardware wizard, click Search for a
suitable driver for my device (recommended), and then click Next.
2. Browse to the location on the where you downloaded the Fibre Channel driver,
then click Next.
Windows displays a message, letting you know it found a driver for this device.
3. On the Completing the Found New Hardware Wizard window, click Finish.