Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z, Installation Manual

Page: 33 / 68

Chapter 2 Hardware Installation and Removal 23
5. To exit the QLogic Fast! UTIL, press the Escape key, highlight Exit Fast!UTIL,
and press Enter.
The following QLogic Fast! UTIL menu is displayed.
The following QLogic Fast! UTIL menu is displayed.
Replacing the SFP+ Unit on the HBA
The Small Form Factor Pluggable (SFP+) optics unit on this card is considered a part
of the card, NOT as a separate field replaceable unit (FRU). Therefore, in the event
that the SFP+ unit malfunctions, you must return the entire card in order to receive
a replacement SFP+ unit. Always return any malfunctioning card with the SFP+ unit
attached. For information about removing the card from a system in order to return
it, see
“To Remove the HBA” on page 24 .
QLogic Fast!UTIL
Selected Adapter
----------------------------------------------------------
Adapter Type I/O Address Slot Bus Device Function
QLE2562 9400 01 02 01 1
----------------------------------------------------------
Fast!UTIL Options
Configuration Settings
Scan Fibre Devices
Fibre Disk Utility
Loopback Data Test
Select Host Adapter
Exit Fast!UTIL
QLogic Fast!UTIL
Exit Fast!UTIL
----------------------------------
Reboot System
Return to Fast!UTIL