Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z, Installation Manual

Page: 29 / 68

Chapter 2 Hardware Installation and Removal 19
▼
To Verify Attached Storage (SPARC Systems)
●
If online storage is connected to the HBA, use the
apply show-children
command to list the attached storage.
Note – You might need to run the
reset-all
command before using the
apply
show-children
command.
In the example that follows, a storage JBOD has one target and two LUNs
attached to one port of a dual port HBA.
manufacturer QLGC version QLE2562
Host Adapter FCode(SPARC): 2.03 06/30/08
model QLE2562
node-wwn 20 00 00 1b 32 14 40 66
port-wwn 21 00 00 1b 32 14 40 66
reg 00060000 00000000 00000000 00000000 00000000 01060010 00000000
00000000 00000000 00000100 03060014 00000000 00000000 00000000
00001000
compatible pciex1077,2532.1077.171.2
pciex1077,2532.1077.171
pciex1077,171
pciex1077,2532.2
pciex1077,2532
pciclass,c0400
short-version 2.03 06/30/08
devsel-speed 00000000
max-latency 00000000
min-grant 00000000
#size-cells 00000000
#address-cells 00000002
device_type scsi-fcp
name SUNW,qlc
fcode-rom-offset 0000b200
interrupts 00000001
class-code 000c0400
subsystem-id 00000171
subsystem-vendor-id 00001077
revision-id 00000002
device-id 00002532
vendor-id 00001077
{1}