Sun Microsystems iPlanet Integration Server 3.0, Process System Manual

Page: 287 / 368

Conductor Script Commands
Appendix A Conductor Script Commands 287
IIOPServer
The
IIOPServer
command starts, stops, or displays information about the IIOP
service needed to support CORBA/IIOP iIS process client applications.
IIOPServer [start|stop|show]
The
IIOPServer
command is always available.
The
IIOPServer
command is used to start up the IIOP service installed by the iIS
installer program on the central server node in your iPlanet UDS environment. The
IIOP service is required for CORBA/IIOP client applications to access an iIS
process engine.
ListActivities
The
ListActivities
command displays all activities in the current engine.
ListActivities
The
ListActivities
command is available only when an engine is current, so you
must first use the
FindEngine
Script command to set the current engine.
The
ListActivities
command displays activities in all process instances of all
registered process definitions. For each activity, the
ListActivities
command
displays the following information: activity name, activity ID, activity state, and
process name.
ListActivityQueues
The
ListActivityQueues
command displays queues either for the specified
process or for all processes in the current engine.
ListActivityQueues [process_name]
The
ListActivityQueues
command is available only when an engine is current,
so you must first use the
FindEngine
Script command to set the current engine.
Argument Description
process_name
The specified process. If not specified then all queues in the engine
are displayed.