Sun Microsystems iPlanet Integration Server 3.0, Process System Manual

Page: 215 / 368

iIS Console Trace Window
Chapter 7 Troubleshooting 215
For example, an iIS message filter for a primary engine unit might be as follows:
FORTE_LOGGER_SETUP: "%stdout(trc:cr:2:2)"
This filter specifies that all messages about sessions created in the engine —but not
a lot of detail—be written to the primary engine unit’s log file (on the server node
on which the primary engine unit is running) and to the iIS Console trace window
(if you have opened it at least once before).
If you do not specify any iIS message filters, none are set by default.
Using the iIS Console Trace Window
You can use the iIS Console trace window to select and display messages generated
by iIS process engine components and to view exception output. Using the trace
window, you can monitor engines distributed throughout your environment from
one central location.
➤
To open the iIS Console Trace window
1.
Select a running engine in the iIS Console main window.
2.
Choose Engine > Trace. This opens the iIS Console Trace window
The trace window shows all messages you specify for components of the
selected engine.
Setting Message Filters
The iIS Console provides a Modify Log Flags window for setting the message
filters described in the previous section,
“iIS Message Filters.”