Sun Microsystems iPlanet Integration Server 3.0, Process System Manual

Page: 314 / 368

Conductor Script Commands
314 iPlanet Integration Server • Process System Guide • August 2001
Shutdown
The
Shutdown
command shuts down the current engine or one of its individual
components.
Shutdown
The
Shutdown
command is available only when the engine is current or if an
engine component is current. Use the
FindEngine
Script command to set the
current engine, and, in addition, the
FindGovernor
,
FindDBService
,
FindUnit
, or
FindPrimary
Script command to make the corresponding engine component
current.
The effect of the
Shutdown
command depends upon whether the engine is current
or an engine component is current:
• if engine: shuts down all components of current engine
• if engine component: shuts down the current component
If the
Shutdown
command results in a primary engine unit being shut down, then
all state information in the engine is lost and must be recovered from the engine
database when a primary unit comes online.
StartActivity
The
StartActivity
command changes the state of the specified activity from
READY to ACTIVE.
StartActivity process_id activity_name session_id
The
StartActivity
command is available only when an engine is current, so you
must first use the
FindEngine
Script command to set the current engine.
The
StartActivity
command does not apply to activities that do not pass through
ACTIVE or READY state, such as First and Last activity.
Argument Description
process_id
The process instance in which the activity was created.
activity_name
The name of the activity.
session_id
The session that will perform the ACTIVE activity. Applies only to
Offered and Queued activities.