Sun Microsystems iPlanet Integration Server 3.0, Process System Manual

Page: 67 / 368

Starting the iIS Console
Chapter 3 The iIS Console 67
Starting the iIS Console
You can start the iIS Console on any node in your iPlanet UDS environment where
it has been installed.
➤
To start the iIS Console on Windows or Windows NT
1.
Double-click the iIS Console icon.
2.
Enter a valid password if one is requested (see “Setting Password Protection
for iIS Console” on page 71 ).
➤
To start the iIS Console on UNIX, OpenVMS, or Windows NT
1.
Use the
cconsole
command (see “Using the cconsole Command” below for
information).
2.
Enter a valid password if one is requested (see “Setting Password Protection
for iIS Console” on page 71 ).
When the iIS Console starts, it opens the iIS Console main window shown in
Figure 3-1 on page 69 .
Using the cconsole Command
As mentioned above, you start the iIS Console on command-line-based operating
systems by executing the
cconsole
command.
The syntax of the
cconsole
command for most platforms:
cconsole [-fl log_flags][-fm memory_flags]
The syntax of the
cconsole
command for OpenVMS:
VFORTE CCONSOLE
[/LOGGER=log_flags]
[/MEMORY=memory_flags]
As in all iPlanet UDS command line specifications, if you use a name that includes
a space, you should enclose the name in double quotation marks.