Sun Microsystems Fire 880, Owner'S Manual

Page: 148 / 236

130 Sun Fire 880 Server Owner’s Guide • August 2001
How to Enable ASR
The automatic system recovery (ASR) feature is not activated until you enable it at
the system
ok
prompt.
What to Do
1. Type the following at the system
ok
prompt:
2. Set the
diag-trigger
variable to
power-reset
,
error-reset
, or
soft-reset
.
Type:
For more information, see “Reset Scenarios” on page 128.
3. To cause the parameter changes to take effect, type:
The system permanently stores the parameter changes and then reboots
automatically.
Note – To store parameter changes, you can also power cycle the system using the
front panel Power button.
ok setenv diag-switch? true
ok setenv auto-boot? true
ok setenv auto-boot-on-error? true
ok setenv diag-trigger soft-reset
ok reset-all