Sun Microsystems Fire 880, Owner'S Manual

Page: 153 / 236

Chapter 6 Configuring System Firmware 135
Note – The device identifiers are not case-sensitive; you can type them as uppercase
or lowercase characters. Also, you can use the wildcard character
*
only with
asr-enable
; wildcards are not allowed with
asr-disable
.
You can determine which devices are currently disabled by typing:
See “How to Obtain ASR Status Information” on page 136.
2. To cause the parameter change to take effect, type:
The system permanently stores the parameter change.
Note –
To store parameter changes, you can also power cycle the system using the
front panel Power button.
ok .asr
ok reset-all