Sun Microsystems Fire 880, Owner'S Manual

Page: 41 / 236

23
C H A P T E R
2
Setting Up the System
This chapter describes what you need to do to get the Sun Fire 880 server up and
running. Where software is involved, this chapter explains some of what you need
to do, and points you to the appropriate software manuals for the rest.
Tasks covered in this chapter include:
■
“How to Install the Sun Fire 880 Server” on page 25
■
“How to Open the Side Doors” on page 29
■
“How to Avoid Electrostatic Discharge” on page 31
■
“How to Install a Disk Drive” on page 33
■
“How to Remove a Disk Drive” on page 36
■
“How to Install a Power Supply” on page 39
■
“How to Remove a Power Supply” on page 42
■
“How to Attach an Alphanumeric Terminal” on page 46
■
“How to Configure a Local Graphics Console” on page 48
■
“How to Power On the System” on page 51
■
“How to Power Off the System” on page 53
■
“How to Initiate a Reconfiguration Boot” on page 55
■
“How to Redirect the System Console to RSC” on page 58
■
“How to Restore the Local System Console” on page 60
Other information covered in this chapter includes:
■
“About the Parts Shipped to You” on page 24
■
“About Setting Up a Console” on page 45