13
C H A P T E R
3
Installing the ExpressModule
This chapter describes how to install the ExpressModule in your system and verify
that it is recognized by the operating system.
This chapter contains the following sections:
■
“Installing an Optical Transceiver” on page 13
■
“Installing the ExpressModule” on page 16
■
“Verifying the Installation” on page 19
Installing an Optical Transceiver
The Sun 10GbE XFP SR PCI Express Card requires a short-range optical transceiver
in at least one port to create an Ethernet connection. The short-range optical
transceiver (part number X5561A-Z) is available from Sun Microsystems.
Note –
Install the optical transceivers into the ExpressModule
before
installing the
ExpressModule into the system.
▼
To Install an Optical Transceiver
1. Pull the locking handle into the full horizontal position.
You will feel the handle click into position when it is fully opened.
Summary of Contents for 5945532
