Operation manual of SR528Q wireless controller
- 8 -
hole of the case
④
or the lower side hole of the case
⑤
.
Cable enters from the rear hole
④
:
Remove the plastic flaps
④
from the rear side of the
case using an appropriate tool.
Cable enters from the below hole
⑤
:
Cut the left and right plastic flaps using an
appropriate tool (e.g. knife) and break them out of the case.
Notes:
the flexible wire must be fastened on the case using the clamps
⑥
provided.
2.5 Wire connection
Before open the wire connection terminal, please be sure to switch-off the
power and conform to the instructions of local power supply.
Terminal layout
Power connection ports
Input Ports: is for power connection, connect L, N wire correctly.
: is ground port.
FUSE:2A/250V
K0
：
Code match button of controller
Temperature sensor inputs
Input T1: For PT1000 temperature sensor, used to measure the temperature of