Operation manual of SR528Q wireless controller
- 37 -
display, “ID 01” shows on the screen.
6.6.2 MAC Network address
Select MAC network address submenu, “MAC 685”
shows on the screen.
6.6.3 FREQ Communication frequency
Select
FREQ submenu, “FREQ 433” shows on the screen.
►Press “Set” button, parameter “433” blinks on the
screen; factory set is “433”. Adjustable frequency is
431-435 MHz.
►Press “▲ ▼” button, to adjust parameter
►Press “ Esc” button to confirm the parameter you
set.
►Press “▲”2 times, “SAVE” blinks on the screen.
►Press “ Set” button, “WAIT- - -” shows on the
screen, waiting for 10 seconds, “ SAVE” blinks, and
system recover to normal operation status in 20 seconds automatically, then new
communication frequency is successful.
(if after setting the new frequency, and “WAIT - - -“ displays on the screen, but
matching with controller is unsuccessful, then error code “ ERR” shows on the screen,
you need to revise the communication frequency).
6.6.4 RSSI Signal intensity
Select RSSI signal intensity submenu, “RSSI 31”
shows on the screen.
6.7 HND Manual control
When using this controller first time or when debugging this controller, outputs of this
controller(P1, P2,R1,H1
）
can be triggered manually with
“On, OFF” control.