Operation manual of SR528Q wireless controller
- 39 -
6.8 PASS Password set
Setup steps:
To access main menu PASS,
►Press “Set” button, “PWDC 0000” appears, the left
figure blinks, ask for entering current password ( factory
set is “0000”)
►Press
“▲ ▼”
button to enter the first figure
►Repress “Set” button, the second figure blinks
►Press
“▲ ▼”
button to enter the second figure
►Repress “Set” button, the third figure blinks
►Press
“▲ ▼”
button to enter the third figure
►Repress “Set” button, the fourth figure blinks
►Press
“▲ ▼”
button to enter the fourth figure
►Press “Set” button, “PWDN 0000” shows on the screen, ask for entering a new password,
doing like above to enter the new password
►Press “Set” button, “PWDG 0000” shows on the screen, ask for reentering the new
password, doing like above to reenter the new password,
“PWOK” shows on the screen to
indicate reentering password successfully.
►Press “Esc” button to exit set program or wait for 20 seconds to exit automatically.
Warning!
If the password is forgot, it is not possible to recover, but you can recover the
password to factory set, then you can reedit a password like above descript steps, doing like
following to recover to factory set.
► Open the cover of display’s button panel
►Press “ON/OFF” and hold it down, and press “Reset”.
Buzzer makes
“du-----“ 3 times, then release “ON/OFF” button. Controller recovers to factory
set( factory set possword is 0000), a new password can be reset now.
6.9 LOAD Recovery to factory set
Setup steps:
To access main menu LOAD,
►Press “Set” button, “YES” displays on the screen.