Sumo DTS 3m, Operator'S Manual And Parts List

Page: 66 / 68

67
12.0 Trailed Drill Settings
Crop Rape Rape Grass Linseed Cereals Cereals Cereals Cereals Cereals Beans**** Peas****
Drilling rate
(kg/ha)
3 10 20 20 80 100 150 200 250 150 150/250
Insert *
Long Long Short Short Short Short Short Short Short Short Short
Gear on
Motor ***
Small Small Large Small Large Large Large Large Large Large Large
Gear on
ORGA ***
Large Large Small Large Small Small Small Small Small Small Small
Min Fan
speed (rpm)
1800 1800 1900 2200 2500 2600 2750 2900 3000 2500 2500
* - Internal inserts are supplied in long and short lengths. The longer insert approximately halves the rate
that the notched slide lets through its aperture. They also act as a guide to align the Sumo ORGA.
*** - The Gears supplied with the Sumo ORGA are specifically designed for the width of Drill that is
specified. There will always be a small and a large gear supplied.
SAFETY NOTICE:
Never operate Sumo ORGA Metering without gear guard in place.
Never put any fingers into the Sumo ORGA Metering until unit is isolated from the power.
Failure to do so may result in injury.
This table is to be used as a guideline to assist in setting up the drill. Fine tuning may be needed depending on environment.
**** Nylon insert not to be used