2
IMPORTANT SAFEGUARDS
WARNING
To reduce the risk of fire, electrical
shock or injury when using your appliance, follow
these basic precautions:
•
Read all instructions before using your appliance.
•
Plug into a grounded 3-prong outlet. Do not remove grounding
prong, do not use an adapter, and do not use an extension cord.
•
It is recommended that a separate circuit, serving only your wine
cooler, be provided. Use receptacles that cannot be turned off by a
switch or pull chain.
•
Never clean any parts of the appliance with flammable fluids.
These fumes can create a fire hazard or explosion.
•
Before proceeding with cleaning and maintenance operations,
make sure the power line of the unit is disconnected.
•
Do not connect or disconnect the electric plug when your hands
are wet.
•
Unplug the appliance or disconnect the power before cleaning or
servicing. Failure to do so can result in electrical shock or death.
•
Do not attempt to repair or replace any part of your appliance
unless it is specifically recommended in this manual. All other
servicing should be referred to a qualified technician.
•
Do not store or use gasoline or any other flammable vapors and
liquids in the vicinity of this or any other appliance. The fumes can
create a fire hazard or explosion.
•
Use two or more people to move and install this appliance.
Failure to do so can result in back or other injury.
•
To ensure proper ventilation for your appliance, the front of the unit
must be completely unobstructed. Choose a well-ventilated area
with temperatures above 61
°
F (16
°
C) and below 95
°
F (35
°
C). This
unit must be installed in an area protected from the elements, such
as wind, rain, water spray or drips.
•
The appliance should not be located next to ovens, grills or other
sources of high heat.
•
For optimum energy conservation, locate the appliance in the
coolest area of the room, away from heat-producing appliances
and out of direct sunlight.
•
This appliance must be installed with all electrical connections in
accordance with state and local codes. A standard electrical supply
(115V AC only, 60 Hz), properly grounded in accordance with the
Summary of Contents for SWBV3001
Page 30: ...29 NOTES...
