PG 9
19.
Insert (1) 50mm all thread bolt into the second hole on the Gun Rest Assembly and secure with a locknut as shown in
figure 21.
Note: This bolt is used as a Gun Rest stop.
20.
Remove the bolts previously inserted into the Foot Platform holding the Jog Tubes to the Foot Platform. Place the Top
Ladder Section (
item P
) tubes onto the OUTSIDE of the welded tabs on the Foot Platform. Insert the Left and Right Jog Tubes
into the Top Ladder Section. Secure with (1) 50mm bolt with lock nut.
See figure 22 and 23.
Part Stack: (the Jog Tube is inserted into the welded tube on the Top Ladder Section), Foot Platform tab, Top
Ladder Section, Jog Tube.
Repeat for the other side.
21.
Place the Support Tube - Long (
item N
) to the outside tab of the Top Ladder Section. Secure with (1) 50mm bolt and lock
nut. Swing the opposite end of the Support Tube - Long to the outside of the Foot Platform and secure using (1) 65mm bolt and
lock nut.
See figure 24.
Repeat for the Support Tube - Short (
item O
).
See figure 25.
22.
Place the flat plate on the Ladder Section (
item Q
) together so
that the plates match and holes align. Secure using (6) 35mm bolts
and locknuts.
See figure 26
. Repeat for the final Ladder Section.
SECURING THE TOP LADDER SECTION
24
LADDER SECTION ASSEMBLY
22
P
SEAT ASSEMBLY
JOG TUBES
23
SEAT ASSEMBLY
JOG TUBES
WELDED TUBE
ON TOP LADDER
WELDED TAB
N
N
O
25
26
