5.
Place the V-Plate Frame - Double (
item F
) between the two Seat Frame subassemblies as shown in
figure 5
with the welded
teeth plate pointed UP. Insert (1) 50mm bolt in the BACK hole on each side and secure with locknuts on both bolts.
See figure 6.
Note: The front hole will remain open until a later step.
Note: The BACK hole has internal threads which do not require a lock nut.
6.
Place the Support Tube (
item H
) into the FRONT of the Platform Rear as shown in
figure 7.
Secure to the Platform Rear using
(2) 65mm bolts and locknuts.
Note: The end with (2) holes will be at the top.
See figure 7
for correct off-set bend orientation.
7.
Place the Support Tube (
item H
) to the BACK of the V-Plate Frame - Double (
item G
) as shown in
figure 8
. Insert (1) 65mm
bolt with lock nut on each side to secure.
8.
Place a Plate Connector (
item K
) onto the FRONT of the Foot Platform and secure using (1) 40mm bolt with locknut. Next,
place the Plate Connector to the BACK side of Jog Tube and secure using (1) 40mm bolt with locknut.
See Figures 9 and 10.
Repeat for opposite side.
PG 6
www.summitstands.com
6
G
5
BOLT LOCATION
TEETH FACING
UP
9
K
10
K
8
H
7
H
H
CORRECT OFF-
SET BEND
