SEAT ASSEMBLY (continued)
8.
Slide one Gunrest Upright down onto the Footrest Bar as shown
in
figure 5
.
9.
Next, line up one of the Seat Side Tubes between the Seat Back
and Footrest Bar as shown in
figure 6
. The Seat Side Tube attaches
over the Gunrest Upright and between the Slide Bracket and Seat
Back.
10.
Use one
1 3/4” bolt and lock nut
to secure at the front.
See
figure 7.
Do not over tighten.
11. Repeat Steps 8 - 10 for the other side.
GUNREST
UPRIGHT
(PN 82072.R40)
5
7
1 3/4” BOLT, LOCK NUT
6
SEAT SIDE
TUBE
(PN 82072.R10)
12.
Insert two
Nylon Bushings
into the pre-punched holes into the
Seat Back as shown in
figure 8
.
13.
Pivot the Seat Back up into the bracket on the Seat Side Tube.
Use a
Nylon Washer
between the Seat Side Tube and the Slide
Bracket as shown in
figure 9
.
14.
Rotate the Slide Bracket down and line up the hole. Insert one
2” bolt with one Steel Slide Bushing
(shown in red) through the hole
in the Slide Bracket and Side Tube and secure with a
lock nut
.
See
figure 9 and 10
. Do not over tighten.
15. Repeat Steps 12 - 13 for the other side.
NYLON
BUSHING
(PN SU10640)
8
2” BOLT, STEEL SLIDE
BUSHING, WASHER
SLIDE
BUSHING
(PN SU10627)
NYLON
WASHER
9
LOCK NUT
10
RIGHT SIDE
LEFT SIDE
PG 6
www.summitstands.com
