PG 9
GUNREST
1.
Slide the Gunrest Bar onto the Left and Right Gunrest Arms as
shown in
figure 19
.
2.
Secure the Gunrest Bar using two
1/4” Wire Lock Pins
as shown in
figure 20.
The Wire Lock Pins allow adjustment of the Gunrest Bar by
sliding it in or out.
3.
Insert two of the
Rubber Gunrest Bumpers
into the pre-drilled
holes on each Armrest (
see figure 21
). Insert by pushing while
twisting slightly.
4.
Each Gunrest Arm has a tab with a pre-drilled hole. Line up
these holes with the holes in the Armrests. Insert two
1/4” Bushings
between the Gunrest tab and Armrest hole (
figure 22
).
5.
Use two
1 3/4” bolts with lock nuts
to secure the bar to the
armrest
(see figure 23.)
6.
Position the Gunrest Pad as shown in
figure 24.
Secure by
wrapping the pad around the bar and using the hook and loop strip
to secure.
RIGHT
GUNREST ARM
(PN 82068.550)
LEFT
GUNREST
ARM
(PN 82068.500)
GUNREST
BAR
(PN 82068.600)
19
1/4” WIRE LOCK PINS
20
GUNREST
PAD
(PN 82068.855)
24
!
CAUTION
DO NOT use the Gun Rest Bar as a hand hold while
climbing into or out of this stand.
RUBBER
GUNREST
BUMPERS
21
23
1 3/4” BOLT, LOCK NUT -
WRENCH TIGHTEN
22
BUSHINGS
