PG 8
www.summitstands.com
16
FOAM SEAT
(PN 82068.850)
FOAM SEAT
1.
Position the Foam Seat inside the frame as shown in
figure 16
.
The thicker portion of the seat is the base.
2.
Wrap the webbing straps over the bar and bring the buckles
together under the seat.
3.
Twist the smaller three bar slide buckle slightly sideways and push
it through the larger D buckle as shown in
figure 17.
4.
The final buckle should look like
figure 18.
Repeat for the other
strap.
17
18
12
U BRACKET
STABILIZER
FEMALE SECTION
(PN 82068.450)
13
1 3/4” BOLT, LOCK NUT -
WRENCH TIGHTEN
STABILIZER
FEMALE SECTION
STABILIZER
MALE SECTION
(PN 82068.440)
14
1/4” WIRE LOCK PIN
15
STABILIZER BAR
1.
Position the Female Section of the Stabilizer bar as
shown in
figure 12.
The Stabilizer bar will attach to the
welded U Bracket. Slide the bar into the bracket and
line up the hole.
2.
Secure using one
1 3/4” bolt and lock nut
.
(see figure 13)
Do not overtighten.
3.
Position the Male Stabilizer bar as shown
(figure 14).
Line up the bolt holes and secure using the
Wire Lock
pin
as shown in
figure 15.
The Stabilizer bar has several
holes to accommodate different tree sizes.
WARNING
!
The foam seat included with this treestand is
removable for storage.
DO NOT
leave your seat
outdoors when it is not being used. Replace seat
cushion every two (2) years.
