CABLES
PG 6
www.summitstands.com
1.
Position one of the Hanging Tabs as shown in
figure 5
.
The bent end of the tab should wrap around the Upright
tube and the open end should face the tree.
2.
Line up one end of the cable with the same hole. The
flat portion of the cable eyelet should sit flush against the
Hanging Tab as shown in
figure 6
. Secure using one
2 1/4”
bolt and lock nut
.
3.
Attach the lower end of the cable to the Platform as
shown in
figure 7
using one
1 3/4” bolt and lock nut
. The
flat portion of the cable eyelet should sit flush against the
platform tubing as shown in
figure 8
. Do not overtighten.
4.
Repeat
Steps 1 - 3
for the other Cable / Hanging Tab.
HANGING
TAB
CABLE
SEAT UPRIGHT
ASSEMBLY
2 1/4” BOLT, LOCK NUT -
WRENCH TIGHTEN
5
6
1 3/4” BOLT, LOCK NUT -
WRENCH TIGHTEN
7
8
1.
Slide the sewn pouch on the Seat over
the Seat Pan as shown in
figure 9
.
2.
Secure the seat using the hook and loop
strips shown in
figure 10
.
9
10
WARNING
!
Replace ALL cables every three (3) years.
WARNING
!
Each time this product is removed from the field,
remove both cable connections at the platform before
folding and storing.
See figure 8.
WARNING
!
The foam seat included with this treestand is
removable for storage.
DO NOT
leave your seat
outdoors when it is not being used. Replace seat
cushion every two (2) years.
SEAT - 82080 LEDGE, 82079 STOOP
