COMPONENTS:
Bath Sling
Tub
Toybar
Lower Arm
Toybar
Upper Arm
Toybar
Clip
Toys (2)
Whale Sifter
ENG
D
C
A
E
B
I
H
G
F
PT
ENG
FR
AR
IT
ES
NL
DE
PL
RU
ASSEMBLY & USE:
MONTAGE ET UTILISATION :
ENSAMBLAJE Y USO:
MONTAGEM E UTILIZAÇÃO:
MONTAGGIO E UTILIZZO:
MONTAGE EN GEBRUIK:
MONTAGE UND VERWENDUNG:
СБОРКА И ИСПОЛЬЗОВАНИЕ:
MONTAŻ I OBSŁUGA:
:ﻡﺍﺩﺧﺗﺳﻻﺍﻭ ﻊﻳﻣﺟﺗﻟﺍ
SET-UP & USE:
To Assemble Toybar:
Step 1: Connect upper and lower toybar arms (Figure A).
Step 2: Fit whale sifter to upper arm (Figure B).
Step 3: Fit toybar to clip (Figure C).
Step 4: Attach assembled toybar to the rim of the tub, near the middle (Figure D).
Step 5: Attach toys to holes on either side of whale sifter (Figure E).
Place the baby bath in a full sized adult bath tub or on a flat surface. Always check water
temperature prior to bathing child. Water temperature should never exceed 100°F (37.8°C).
Always keep the drain open in the adult tub. NEVER leave child unattended while in bath.
NEWBORN BATH SLING IN INFANT TUB
Fit the sling to the tub using the 4 clips provided (Figure F), making sure they are inserted into the slots
shown (Figure G). Place newborn carefully onto bath sling to bathe (Figure H).
TODDLER TUB POSITION
Place child carefully in Toddler Tub to bathe (Figure I).
CARE & MAINTENANCE:
Newborn Sling & Toys: Rinse with clean warm water and mild soap. Air dry.
Bath Tub: Clean with damp cloth, mild soap and warm water.
Inspect all components prior to use and discontinue use if damaged, broken or disassembled.
