6
11
reclining the seat:
position
3
press!
press both recline buttons at the same
time and rotate to adjust seat angle. The
seat will click into one of three positions.
1
position
press!
press!
position
2
press!
press!
using the bumper bar:
press!
press!
press release button, pull up
and swing bumper bar to side
1
NOTE: the bumper bar can be
removed by detaching both sides.
• Infant car seat adapter must be securely locked
to stroller before infant car seat is placed
on stroller.
• NEVER use infant car seat in stroller without
car seat adapter.
• CHECK to confirm that car seat adapter and car
seat carrier are securely locked to the stroller.
• NEVER lift stroller by infant car seat handle.
•
Read all warnings on front page of this
instruction booklet and on product.
W
ARNING:
PREVENT SERIOUS INJURY
OR DEATH FROM FALLS
car seat adapter installation for use with Prodigy®:
Adapter Straps are not necessary
for installing the Prodigy.
!
Pull up on the car seat to make
sure it is properly locked
into place.
IMPORTANT!
REAR FACING ONLY!
Do NOT install forward facing.
!
click!
press down on brake
pedal to engage brake
and remove stroller
seat
click!
2
1
3
install car seat rear
facing, push down to
lock into position
align car seat adapter
with arrow facing forward,
push down onto frame
car seat adapter installation instructions
for use with the Prodigy®, Chicco® Keyfit®, Graco® Snugride®, Peg Perego® Viaggio® infant car seats.
installing car seat adapter strap:
wrap small strap
around bar and feed into clip
1
2
wrap large strap
around bar and feed into clip
NOTE: Adapter straps
must be used when
fitting the following
car seats into the
stroller:
* Chicco Keyfit
®
* Peg Perego Viaggio
®
* Graco Snugride
®
It is not required for
Prodigy
®
Car Seat.
!
FRONT
Assemble straps to frame
between peg and knuckle.
!
