Snapshots: External Trigger Connector Pinout
47
SMX-10Mxx Series USB2.0 Camera User Guide
External Trigger Connector Pinout
External trigger connector pinout
Setting External Trigger Polarity
The polarity of external trigger is set via the
Device Setting
window (press
Alt+s
on the
keyboard).
Figure 6-4
Setting the external trigger polarity
The following options are available:
●
Positive -
the
External Trigger Input 1
will be enabled
●
Negative -
the
External Trigger Input 2
will be enabled.
Saving Snapshots
When you take snapshots, they are saved in directory and with file prefix specified in
Capture Options
.
To change options for saving snapshots:
1
Open the
Capture Options
dialog by pressing
Alt+c
on the keyboard or go to the
File
menu and select
Capture Options
.
Common (GND)
External trigger input
External trigger output
Summary of Contents for SMX-10M Series
