3
R AT I O
I N P U T
k W
r / m i n
S E R I A L NO.
O U T P U T T O R Q U E
S E R V I C E F A C T O R
MODEL
N
•
m
R
J A P A N
1 Type of reducer
(Refer to page 4.)
2 Reduction ratio
･
Service factor
･
Allowable input
capacity speed
[r/min]
･
Allowable output
torque
3 Serial No.
COMMON
1. Inspection Upon Delivery
CAUTION
Make sure that the unit is positioned right side up before unpacking. Otherwise, injury may occur.
Make sure that the unit agrees with your order. Injury or damage to the equipment may occur by using the
incorrect product.
Do not remove the nameplate from the unit.
Make sure of the following when this product arrives.
1. Do the items shown on nameplate agree with the order?
2. Was there no damage during transportation?
3. Are all bolts and nuts tightened firmly?
Consult our agent, distributor, or sales office for any defect or questions.
1-1) Inspection of the Nameplate
Gearmotor
Fig. 1 Nameplate of Gearmotor
Reducer
Fig. 2 Nameplate of Reducer
1-2) Inspection of Lubrication Method
Make sure of the lubrication method by referring to section "8-2. Lubrication Method" on page 24.
•
Oil lubrication models
are shipped with out oil. Always supply the unit with recommended oil before operation.
•
Oil supply for two places is necessary for some models for output side and input side, (such as
combination of BUDDYBOX and CYCLO).
COMMON
Nameplate of Gear
Nameplate of Motor
• Let us know the (1) Nomenclature of gearmotor or reducer, (2) reduction ratio, and (3) serial number when
consulting us.
R AT I O
I N P U T
k W
r / m i n
S E R I A L NO.
O U T P U T T O R Q U E
S E R V I C E F A C T O R
MODEL
N
•
m
R
J A P A N
1 Type of gearmotor
(Refer to page 4.)
2 Reduction ratio
･
Service factor
･
Allowable input
capacity and
speed [r/min]
･
Allowable output
torque
3 Serial No.
Motor capacity
Characteristics of
motor
Motor efficiency
IE code
Power factor
Brake current value
(for the motor with a
brake)
4 Motor
nomenclature
5 Type of brake
(for the motor
with brake)
Serial No.
Brake torque
(for the motor
with brake)
