8
COMMON
Note the following on storing gearmotor or reducer, when not using the unit right away.
2-1) Storage location
Store the unit indoors in a clean dry place.
• Avoid storage outdoors or in places with humidity, dust, sudden temperature changes or corrosive gas.
2-2) Storage period
1. Do not store the unit for more than 6 months.
2. Consult us when the storing the unit for more than 6 months. Special rustproof specification is necessary.
3. Consult us when exporting the unit. Special rustproof specification in necessary.
2-3) Use after storage
1. Make sure that there are no deterioration in non-metal parts, such as oil seal and oil supply plug, before operating after
extended period of storage. Non-metal parts may deteriorate easily by the effect of ambient condition, such as
temperature and ultraviolet rays. Replace the deteriorated parts with new parts.
2. Make sure that there is no abnormal noise, vibration, or temperature rise when starting. Make sure that the brake
functions normally when for types with brake. Consult our distributor or sales office immediately if any abnormality is
found.
2. Storage
3. Transportation
DANGER
Do not stand below the unit when it is lifted. Injury or death may result.
CAUTION
Be careful not to let the unit drop or fall when moving the unit. Always use the metal hanging piece for gear or
motor with it. But do not hang the unit using the metal hanging piece after mounting with application machine.
Otherwise, it may cause personal injury or damage to the equipment and/or damage to the equipment.
Make sure of the mass of gearmotor or reducer by looking at the nameplate, packaging, drawing, catalog, etc.,
before lifting. Do not lift the gearmotor or reducer, which are heavier than the rated weight of the lifting equipment.
Otherwise, it may cause injury or damage to the equipment and lifting device.
