Install the connection part
Procedure
1. Install the connection part (A) and the
seal (B) in the hole of the drain plug.
Use a torque wrench to torque the
connection part to the correct value.
For the torque values for the different
connection parts, refer to section
Torque values for the connection set
on page 31.
Install the drain plug
Procedure
1. Install the drain plug (A) and the seal
(B) on the connection part.
• Use the drain plug and the seal
that you removed from gear unit or
the hydraulic system. If necessary,
replace the seal.
• If the drain plug that you removed
from gear unit or the hydraulic
system is magnetic, replace it with
a non-magnetic drain plug.
Install the plug and the nipple
Procedure
1. Install the plug (A) and the nipple (B).
Use applicable sealant on the threads
of the nipple on the side that you install
into the connection part.
A
B
A
B
A
B
Installation
20
UM_VP2500L_002_EN
