Connect the suction hose to the device
Procedure
1. Connect the suction hose (A) to the oil
inlet (B).
Make sure that the plug is removed
from the oil inlet.
2. Turn the nut (C) clockwise to tighten
the suction hose to the oil inlet.
Connect the return hose to the device
Procedure
1. Connect the return hose (A) to the oil
outlet (B).
Make sure that the plug is removed
from the oil outlet.
2. Turn the nut (C) clockwise to tighten
the return hose to the oil outlet.
Connect the suction hose to the gear unit or the hydraulic system
Note:
• Install a drain valve on the gear unit or the hydraulic system to make it
easier to disconnect and connect the device.
• A connection set is required to connect the suction hose. For information,
refer to section
on page 31.
Remove the drain plug
Procedure
1. Remove the drain plug and the seal from the gear unit or the hydraulic system. Do
not discard the drain plug and the seal.
6.3.1
B
C
A
6.3.2
B
C
A
6.3.3
Installation
UM_VP2500L_002_EN
19
