Operation
Start the device
Note: Before you start the device for the first time, refer to the general
instructions in section
Use the device - general instructions
on page 24.
Procedure
1. Push the Start button (A).
Stop the device
Procedure
1. Push the Stop button (B).
Get an oil sample
Note:
• The device and the gear unit or the hydraulic system must be in operation
when you get an oil sample.
• Let the device run for a minimum of 30 minutes before you get an oil
sample.
8
8.1
A
8.2
B
8.3
Operation
UM_VP2500L_002_EN
25
