Platinum and Platinum-Plus Warranty
Industrial Compressors — 15hp and Larger
Sullivan-Palatek hereby offers the following Platinum Extended Warranty to the first retail purchaser of an industrial com
-
pressors of 15 HP or larger, excluding XH high pressure models designed to operate at 250 psi or more. The Platinum
Extended Warranty is limited and applies to specific components as detailed below.
The terms, conditions and limitations
contained in the Sullivan-Palatek standard warranty, which is printed on the reverse, apply to the Platinum Warranty and
that warranty is herein incorporated by reference.
Component Coverage:
Platinum Warranty: Parts and labor to repair or replace as deemed necessary solely by Sullivan-Palatek, Inc. the Com-
pressor Air End, Compressor Motor, VFD Drive, Fan Motor (if installed) Air and Oil Coolers, Sump Tank, and Drive Coupling
Assembly (excluding elements).
Platinum Plus Warranty: Compressor Air End (stator and rotor assembly) repair or replacement, parts only. Labor, freight,
travel and other costs are expressly excluded.
Duration:
Platinum Warranty:
60 months from the date of start-up as evidenced by the required warranty registration documents.
Platinum Plus Warranty Duration:
120 months from date of start-up as evidenced by the required warranty registration
documents.
The Platinum and Platinum-Plus Extended Warranties are an extension of the standard Sullivan-Palatek, Inc. warranty and
begin upon expiration of that warranty and continue to the time limit measured from the delivery and start up of the com-
pressor to the original retail purchaser. Parts repaired or replaced under warranty are warranted for the remainder of the
warranty period applicable to the replaced part.
Registration and Obtaining Warranty Service:
The platinum warranty registration and startup card supplied with the
compressor must be completed and returned within 10 days of delivery and start up to register the compressor in to the
Platinum program. Eligibility for the Platinum warranty will expire 180 days after shipment of the product from the factory
and can only be reestablished by application to the Sullivan-Palatek Product Support department, which may require a paid
on-site inspection before granting. Service under this warranty is obtained by contacting the authorized Sullivan-Palatek
distributor before the expiration of the warranty.
Sullivan-Palatek’s Obligations:
Sullivan-Palatek, Inc. will repair or replace, at Sullivan-Palatek option any defective part, pay
the reasonable labor cost of making the repair or installing the replacement part when coverage includes labor, pay ground
freight for the return of defective parts and shipment of replacement parts.
Purchaser’s Responsibility:
In addition to the responsibilities detailed in the standard Sullivan-Palatek, Inc. warranty the
Platinum Extended Warranty requires that the purchaser use Sullivan-Palatek brand compressor lubricant, filters and
service parts obtained from Sullivan-Palatek or one of its authorized distributors or service outlets. Proof of compliance
with these terms must be available and rendered upon request in the event of a claim under this warranty. To facilitate and
ensure purchaser’s compliance with the service requirements of the Platinum and Platinum Plus extended warranties pur
-
chaser will be required to buy one annual maintenance kit per year during the period of the extended warranty and advise
the model and serial number of the compressor for which the kit is purchased.
This warranty applies to all Sullivan-Palatek stationary industrial air compressors of 15 horsepower or greater,
excluding
XH models
designed to operate at 250 psi or more shipped after April 1, 2011 and supersedes previous warranties. In the
event of any conflict between this warranty and earlier warranty statements, the terms of this warranty will prevail.
Summary of Contents for SP20
Page 12: ...4 Introduction ...
